Forge Motorsport Intercooler Upgrade Kit suits Hyundai i30N Mk3.5 Facelift

Ex Supplier - ETA 3-5 days

The Forge intercooler helps keep the IATS at a safe level
129% more volume
Increase of frontal surface area over 71% (over the stock cooler)
Bar and plate construction
Inlet and outlet sizes increased in diameter to 65mm

With the success of Forge Motorsport’s FMINT15 for the Hyundai MK3 i30N it was only obvious they should further development on the facelift MK3.5, with only a few minor design tweaks their plug-and-play solution is now available for the latest of Hyundai’s revision. Hyundai redeveloped the turbocharger to run higher boost and a larger flow than the previous generation there is even more reason to replace more restrictive OEM intercooler with the larger Forge Motorsport item, based on a stage 2 ECU calibration and fitted with the Forge intake (FMINDK28) and turbo inlet adaptor (FMTIA10) the new intercooler performed as expected.

The Forge intercooler helps keep the IATS at a safe level and prevents the stock ECU from pulling out the timing of the engine resulting in a loss of power. If you use an i30N for fast road or have a high-performance tune in a hot climate, this product is essential. Utilising Forge's industry-leading bar and plate design alongside Solidworks CAD and flow simulation design (Computational Fluid Dynamics - CFD) to develop our high flow cast end tanks, the turbo side end-tanks feature an internal divider to ensure the full volume of the stepped core is utilised.

The bar and plate core has over 129% more volume and an increase of frontal surface area over 71% (over the stock cooler) meaning the Forge Motorsport intercooler is the largest currently available on the market. To ensure we deliver optimum cooling efficiency, the development team created a fabricated ducting system that has been skillfully integrated into the superior design of this product.

The inlet and outlet sizes have been increased in diameter to 65mm, giving an increase of 27% more volume over the stock cooler to give perfect flow. The development team also added a custom hard pipe increasing the diameter by 14 mm to 64mm - up from the factory 50mm. This replaces the stock factory pipe on the hot side to ensure this package gives you all you need for maximum performance gains on high levels of tune.The boost pipe and intercooler come in our standard black textured finish powder coat for maximum longevity.

Forge Motorsports FMINT27 Intercooler Upgrade Kit Mk3.5 features:

Maintains steady & safe Intake Air Temperature throughout exertion
Installed in as little as 2.5 hours
Significantly increases power & torque over Hyundai's stated benchmarks
Dyno testing yields 307bhp & 307lb/ft, up from stock 275bhp & 278lb/ft
Efficiently cools even in hotter conditions